1. analysis model
The same rigidity material is used up and down, the lower plate is fixed on the upper plate, the section is pressed down 0-, and the normal work is 1.58mm- press 3.1mm.
2. boundary imposed
During the whole down pressure, the contact surface will be added with frictional contact coefficient of 0.1.
Fixing all degrees of freedom on the lower surface of the lower plate.
All degrees of freedom except for UY.
The upper surface of the upper plate is segmented under pressure 0mm-1.58mm-3.1mm.
3. overall deformation results
4. stress results
5. reaction force (bearing stiffness curve)
Contact Person: Mrs. Janet
Tel: 0086-18957716162
Fax: 86-577-62606162
C Series Multi Turn Wave Springs - Inch Plain ends
Nested Wave Springs Multi Turn Wave Springs - Inch Plain ends
LS Series Wave Springs Inch Linear Springs
Custom Stainless Steel Linear Wave Springs for Toys , Size 5mm-1000mm
Square Wire Constant Section Retaining Rings With Radial Pinch Installation / Removal Provisions
Rectangle Section Wire Snap Rings For Automotive OEM / ODM Available
No Custom Tooling Charges Wire Snap Ring With ISO9001 TS16949 Certificate